kill.switch [TM] and (C) 2003-2004 Namco Hometek Inc. All Rights Reserved
Licensed to Hip Interactive. Hip Games [TM] is a registered
trademark of Hip Interactive Inc. All rights reserved.
################################################################################
Readme File
Version 1.0
This document contains last-minute information about the
PC version of kill.switch [TM]
################################################################################
Table of Contents
(1) Minimum hardware requirements
(2) Recommended hardware requirements
(3) DirectX 9
(4) Creative Labs EAX [TM]
(5) Dolby Digital [TM]
(6) Joystick / Game-pad support
(7) Support
################################################################################
(1) Minimum hardware requirements
Supported operating systems :
Microsoft Windows 98
Microsoft Windows Millenium Edition
Microsoft Windows 2000
Microsoft Windows XP
Supported hardware :
Intel Pentium III 800MHz or above
AMD Athlon 900MHz or above
128 MB RAM (for Windows 2000 and Windows XP)
64MB RAM (for Windows 98 and Windows Millenium Edition)
DirectX 9 compatible sound card
16x speed CDROM/DVD drive
Supported video cards:
kill.switch has been tested and designed to work
on video cards using the following chipsets:
ATI
Radeon 7500
Radeon 8500
Radeon 9000 series or better
nVidia
GeForce 2
GeForce 3
GeForce 4
GeForce FX series or better
Matrox
Parhelia
Intel
Intel Extreme 845
(1a) Tweaking Performance
To increase the frame-rate on low end PC, set the Resolution to 640x480 in
the Graphics Settings in the setup program (this is the default).
Please ensure you have the latest drivers for you video card.
nVidia cards : www.nvidia.com
ATI cards : www.ati.com
Matrox : www.matrox.com
Intel : www.intel.com
Other video cards not in this list may work but are unsupported
################################################################################
(2) Recommended hardware requirements
For optimal performance we recommend a PC with at least the
following hardware:
Pentium 4 or AMD Athlon, 1,5 GHz or higher
GeForce 3 or Radeon 9000 series with 64MB RAM or higher
################################################################################
(3) DirectX9.0
kill.switch (TM) requires DirectX 9. When you install the game you
will be asked whether you want to install DirectX 9. If you have
already installed DirectX 9 or want to install it later, please
un-check the appropriate option.
################################################################################
(4) Creative Labs EAX
kill.switch (TM) supports Creative Labs EAX on supported sound cards.
When you install the game you will be asked whether you want to
install the EAX drivers.
EAX support is automatically enabled if available.
################################################################################
(5) Dolby Digital
kill.switch (TM) supports Dolby Digital(TM) on Nvidia nForce or other
motherboards/soundcards containing the Dolby Digital Interactive Content
Encoder required for Dolby Digital audio
################################################################################
(6) Joystick Support
kill.switch (TM) can be played with a joystick / game-pad provided the device
has two analogue sticks and at least eight buttons.
When you select a joystick in Controller Settings the set-up program will
attempt to auto-configure the controls for joysticks which it can recognise.
However, please ensure that the joystick axes are mapped correctly to the
movement and camera controls. Some joysticks / game-pads can have analogue
buttons which behave in a similar way to analogue sticks if these are mapped
to the camera controls then the game may not function as expected e.g. camera
spinning constantly.
################################################################################
(7) Support
USA & Canada
WEB : Visit www.hip-games.com/support.php
Email : [email protected]
Europe
WEB : Visit www.lspgames.com
Email : [email protected]